Note: please don't spam any of the e-mail addresses which you see here. Follow this link if you want some addresses to misuse.
From: Francisco Franco <ffranco@aerocompsys.com>
Date: Mon, 29 Apr 2002 17:14:28 -0400 (EDT)
Subject: Re: PPR: missing ppr.conf?
Hi Folks,
When submitting a postscript print job, I get the following messages:
+++
WARNING: Procset "NTPSOct95" has no version and revision numbers
WARNING: Ignoring "%%Pages:" in trailer because no "%%Pages: (atend)" in header
WARNING: 241757 characters follow EOF mark
WARNING: No valid "%%Pages:" comment
+++
The printjob gets stuck at 9% and goes no further. I have tried to change
PPD files from the Optra 1855 to the Optra 1255 to Optra 1655 to the
AppleLaserWritter to the HP Laserjet 4Si Postscript. I can print output
from Netscape browser and from text (ie ls | pprd -d...), but I can't
print the file that is giving me the problem. I tried to open the
file that is giving me the problem in GhostView and Ghostview does not
complain about the file.
Are there any parameters that I can use to force the job through or get
more info as to why the job is stuck where it is. Here is the output from
the different ppr commands:
+++
$ ppop status LOS1650
Printer Status
- ------------------------------------------------------------
LOS1650 printing LOS1650-20
Printer Status: operational, idle
Operation: waiting for printer to finish...
Page Clock: 28 seconds
$ ppop list LOS1650
Queue ID For Time Pgs Status
- ----------------------------------------------------------------------------
LOS1650-20 francofr 05:00PM 001 printing on LOS1650
9%, page 1
$ ppad show LOS1650
Printer name: LOS1650
Comment: LexMark Optra S 1650
Location: 14th Floor
Interface: tcpip
Address: "10.20.32.121:9100"
Options:
JobBreak: pjl (by default)
Feedback: yes
Codes: Clean8Bit (by default)
Alert frequency: 0 (never send alerts)
Alert method: none
Alert address: none
Flags: no no (banners discouraged, trailers discouraged)
Charge: none
PPDFile: HP LaserJet 4Si 4SiMX PS 600dpi
Bins: AutoSelect, Tray1, Tray2
OutputOrder: PPD
Default Filter Options: level=2 colour=False resolution=600 freevm=718626
mfmode=ljfour
Switchset:
+++
Any suggestions?
Francisco
- --
Francisco Franco ffranco@aerocompsys.com
AeroComp Consulting Inc. (416) 409-0163